Best Manual Log Saw

Quick Access to Content – Summary

Whether you are a tradesman or a home improvement enthusiast, you need a sharp and sturdy log saw. The log saw is one of the most common tools for manual cutting. It is an extremely versatile tool that can be used for all kinds of interior and exterior projects, from woodworking and carpentry to home improvement or general maintenance work.

The best manual log saws for making your wood

In order not to search for hours on end for the best log saw for your work, here is a selection of 3 products, which can meet your different needs.

Stanley 2-15-283

This saw is best for cutting medium wood planks or chipboard. It has a 0.85mm thick blade with very fine toothing, to make smooth cuts with error-free precision.

Ergonomically, there is nothing to complain about, like the other saws of the brand, the holding is pleasant and safe, thanks to the rounded handle and the non-slip texture. The issue of pain in the hand that can be common with other saws, will no longer be relevant.

A weight that may seem a bit heavier than some other log saws, at 525 grams and yet it is a product that is very balanced, so the weight has no impact during use.

The brand uses HardPoint technology on its products. This technology guarantees the quality of saws, the metal is treated in such a way that the blade is twice as resistant against wear and oxidation

S&R Hand Saw for a coarse cut

This handsaw is perfect for cutting hardwood, plywood, chipboard, joists or even rafters, making it very multitasking. The power saws have the particularity of being very flexible, which allows to perform a clean and safe cutting job without the possibility of deviating from the marking.

The S&R log saw is composed of a blade made of 8 teeth per inch and measuring 475 mm for a thickness of 1mm, making in all with the handle included a length of 565mm, for finally a weight of 454 grams.

Presch Log saw with layout

Whether for a rather thick beam or a thinner bar this saw is perfectly adequate. With a size of 450 mm and 440 it is very light and therefore easy to handle.

In addition to its very light weight, this hand saw has very sharp teeth to get through all the pieces of wood with a very fine cut. The measurements printed on the blade allow various cuts and angles ranging from 45 to 90 ° to be performed with precision.

This saw offers a pleasant and lasting hold, even in wet conditions, thanks to the bi-material and non-slip handle. The colored handle allows the saw to be immediately located when it is set down, preventing the risk of injury.

The different types of hand saws to use for cutting wood

If you have more complex carpentry or carpentry work, choose a saw specially designed for these tasks, on you can also discover electric models that are much easier to use. Also, the type of hand saw will depend on whether you are cutting with the grain or across the grain. There are 3 main types of basic hand saws: cross cut hand saws, hand cut off hand saws, dovetail saw

Cross-cut hand saws

If you are cutting across the grain, you need a jigsaw. The teeth of a cross-cut saw are at right angles and have a beveled edge like a knife point. This cross-cut design allows the saw to act as a sharp knife that cleanly cuts the grain of the wood and cuts each of the fibers.

Hand saws for hand cutting

When making a cut with the grain of the wood, use a chop saw. In comparison with a cross saw, the teeth of the chainsaw are tilted to the left and they are not bevelled. The teeth bend left and right in an alternating pattern, which allows each tooth to behave like a chisel chisel that removes small pieces of wood that you have seen along the grain of the wood. Also, the jigsaw blade cuts on push, not pull, like you would with a cross-cut hand saw.

Dovetail saw

A dovetail saw is specially designed for working with hard and soft wood, as well as for fine carpentry work requiring very precise cuts and a beautiful finish. These types of hand saws are intended for making dovetail joints where two pieces of wood need to fit together perfectly.

The dovetail saw has a small blade that is stiffer than the cross cut or rip saw so it can cut nice straight lines on shorter pieces of wood meaning it can create a finish sharper. The dovetail log saw also has a cylindrical handle that can be rotated freely in your hand, giving you more control over the shape of the cuts you need to make with the wood.

How to choose the best hand saw

In order to be able to choose the right type of hand saw for your woodworking project, you need to think about what you want to use it for and what type of cut you are going to make. Some hand tools are great for circular saws and can be used for almost any cutting job, from carpentry to general DIY maintenance or cutting tree branches.

Number of teeth per inch

The number of teeth per inch or TPI varies among hand saws, which will dramatically change the way you cut wood.

If you want a neat and tidy cut, choose a log saw with a higher tine per inch range. To cut large pieces of wood for framing, choose a handsaw with a lower TPI. Keep in mind that a handsaw with a lower TPI can cut faster, but it can give the wood a coarser cut.

Perfect size for a log saw

The size of the log saw is determined by the length of the blade. Short manual panel saws range from 30 to 50 cm. They are generally suitable for carpentry jobs because they give you more control. Hand saws that are 60-75cm longer are ideal for cabinet making or general tasks.

Share on facebook
Share on whatsapp
Share on skype
Share on twitter
Scroll to Top